Introduction:

The i-PHONO mini Bluetooth?Stereo Transmitter (P/N: BT450Tx) enables your iPod?*1 MP3 player to transmit wirelessly the quality stereo music to the compatible Bluetooth A2DP-Sink device such as the i-PHONO mini Bluetooth Stereo Headphone (P/N: BT450Rx) via the Bluetooth A2DP (Advanced Audio Distribution Profile); meanwhile, you can use the connected i-PHONO mini headphone to remote control *2 the iPod music playing *3 via the Bluetooth AVRCP (Audio Video Remote Control Profile).

Besides using the i-PHONO mini stereo transmitter with the iPod, you can apply its stereo transmission function to the general music player such as a CD player, MP3 player, mini Hi-Fi system, handheld game condole, portable media player, computer, etc. No driver installation is needed; effortlessly, you only need to pair the i-PHONO mini stereo transmitter with the compatible Bluetooth A2DP-Sink device, and then connect the i-PHONO mini stereo transmitter with the player via the exclusive Extension Stereo Adapter.

Specification

UNIT

Dimensions: 55x36.5x16 mm (Stereo Plug Excluded) Weight: 26 g (Battery Included) Built-in Stereo Plug: ?3.5 mm (1/8 in) (Diameter)

-

SOUND

Frequency Response: 20 Hz ?20 KHz Sample Rate: 48 KHz, 16Bit Input Impedance: 30 KΩ @ 0 dB gain Line-level Input: 1 Vrms @ 0 dBFS (Full Scale)

-

BLUETOOTH

Specification: Bluetooth v1.2 compliant Bluetooth Profile Supported: A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) Fixed PIN Code: 0000 (a sequence of four zeros) Connection: Point-to-Point Audio Codec: SBC

-

RADIO

Carrier Frequency: 2.4 - 2.483 GHz Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum) Modulation Method: GFSK (Gaussian Frequency Shift Keying) Radio Coverage: Class 2, up to 3?0 m (9?0 ft) in open field (The actual range depends on the paired Bluetooth device, battery power, and environmental factors: orientation of devices relative to each other, obstructions, enclosures, radio frequency noise, and interference.) Antenna: Ceramic Antenna Sensitivity: < 0.1% BER @ -80 dBm RF Output Power: -6 to 4 dBm

-

POWER

Power Consumption: 190 mW Power Input: 5 V / 200 mA (Use only the original USB power cable included in the BT450Tx & BT450Rx-C retail package to charge the BT450Tx stereo transmitter.) Built-in Battery: 3.7 V / 300 mAh / Li-Polymer / Rechargeable

-

OPERATION

Operating Time: approx. 7 hours (The actual operating time depends on the usage frequency and environmental factors. The long distance wireless connection will increase the power consumption.) Operating Temperature: -10 °C ~ +60°C Storage Temperature: -20°C ~ +70°C

BT-450TXRegular Price: $49.99Discount Price: